The 2500 Series Gun-Kote is the same formula as the 2400 series, but this is the metallic line. This series has a more aesthetic look to it but does the same in chemical, impact, ware and corrosion protection. The 2500 Series Gun-Kote is a true one-part bake on protective coating. Our one part system means no hardeners that have to be mixed into the coating. Whatever is not used is simply poured back into the original bottle. Its much easier to work with and there is no pot-life that needs to be considered. There is no waste. The 2500 Series provides excellent abrasion, chemical and impact resistance. The coating is guaranteed not to Chip Flake, Peel or Rust Creep. Most important the coating displays excellent coating layer to coating layer adhesion or a need to be concerned about how long the coating has been sitting before you have to use it. There is no window for re-coating or repair work. The 2500 Series has an average particle size less than 10 Microns. Given the relative size of the particle means you can lay several colors down and have the final finish feel like one smooth color. The 2500 Series is the backbone of the KG coating lines. It is our most popular Series. Some of the uses include: – Exterior of weapons (including magazines) heavy artillery and bomb casings – Engine blocks and headers to dissipate the heat – Engine water jackets and water pumps to act as a barrier between dissimilar metals – Transmission cases and rear end housing to transfer heat from housings – Radiators, oil and transmission coolers to dissipate heat – Brake Calipers – Outboard motors – Motorcycle parts to include external motor parts – Boats, cleats and other marine hardware – Kitchen cabinet accessories.